When a visual transformation of any home space is required, one of the most impactful starting places is the walls, and transforming wall tiles can make a huge difference. It gives an added texture, color, and a little bit of elegance. Today Tile Instantly – Your go-to article for anyone who wants to install tiles in a bedroom or not. That’s why here is a simple guide how to tile the wall properly if you have never done it before or you just have no experience in tiling.
Step 1: Assemble Resources and Equipment
Before starting, ensure you have the necessary tools:
- Tiles of your choice
- Tile adhesive
- Notched trowel
- Tile spacers
- Spirit level
- Tile cutter
- Grout
- Sponge and clean cloth
- Accessories such as gloves and goggles
This way everything will already be ready; the execution of these actions will be easy and spare no tension.
Step 2: Prepare the Wall
One misconception that tile contractors ought to ditch is they don’t have to prepare before they install tiles. Make certain the wall to which the Control4® system is to be attached is clean, dry, and flat. Spare tip: Strip paint or wallpaper off the walls or clean off the wall for any debris. If the wall is one that you are realigning to be even, then the most important tool that you need here is a spirit level. Even if there are minor bumps, use sandpaper or put an undercoat before the actual flooring material is laid down.
Step 3: Plan Your Layout
Lay down your tiles on the floor, to have an idea of how the pattern would look like before fixing anything. It is time to determine where to begin the tiling – most commonly, right in the center of the wall. It is recommended to use a pencil or chalk while drawing the guidelines on any drawing paper.
Step 4: Apply Tile Adhesive
The dip of the notched trowel should be pressed against the wall with a small amount of tile adhesive used first. Point the handle of the trowel in the direction of the first shadow cast by light and hold the trowel by the blade at 45 degrees to draw ridges. This helps to make certain it sticks well to the surface of the tiles.
Step 5: Place the Tiles
Apply individual tiles onto the adhesive pressing them right from the guideline you have drawn. Once tiles are on the wall, apply a tile spacer between tiles to achieve consistent spacing. It is a crucial tool to use a spirit level and make sure that your tiles are running in a straight line. Cut large pieces into smaller ones in order to avoid adhesive from getting dry before attaching them.
Step 6: Cut Tiles to Fit
For edges or corners, fit the tiles measure the space that is left, and cut the tiles with the tile cutter. Remember to be patient—you’d rather spend more time cutting than recalling this again!
Step 7: Let the Adhesive Set
Some of the setting adhesives may take up to 24 hours and therefore do not dismantle the joint for some time after application. This step is crucial and any movement should not be made for stability sake and any attempt to move or adjust tiles should not be made.
Step 8: Apply Grout
After drying the adhesive apply grout over the spacer and tile joints with the help of a grout float. Remove excess grout by simply washing it with a damp sponge and letting it dry, as stated on the product’s package.
Step 9: Polish and Admire
After the grout has undergone the whole process of hardening, wipe the tiles with a soft cloth. Look what you have done, you have changed your bedroom completely!
Final Thoughts
Many people may find the process of putting up bedroom wall tiles a bit complicated; however, with time and the help of this guide, your tiles will look like they were put up by professionals. Moreover, in doing the project on your own, it is always a great feeling especially when it has been done appropriately. Happy tiling!