A new washing machine is a magical gadget that will keep your clothes clean and soft, but they can start to stink after time. Whether you’re dealing with mildew or mold buildup, we have some tips on how to clean a washing machine and make it run like new again. Many people want to know how to clean a front load washer or top load washer. 

When you look in your washing machine and see a grimy mess, it can be hard to remember the last time you cleaned it. Sometimes not proper cleaning becomes the cause of rust which later make iron damage and your machine stop working correctly. 

So, at that time, you will feel the need to call the washing machine repair Dallas. It is costly. So, to avoid these things try to clean them correctly and weekly. Learn how to clean the inside of your washing machine with these easy steps below.

1. How to Clean Front-Load Washers

Your front-load washer probably uses less water than other machines since it only fills up the washbasin part of the way before starting its cycle. It can cause problems because mildew and mold can form on the rubber door gasket if it’s not cleaned regularly. Wipe the door gasket down after every use to keep it mold-free, and follow these steps once a month to deep clean your front load washer.

What you need

White vinegar, baking soda, bleach, gloves for handling harsh chemicals, nylon scrubbing pad or sponge, soft cloths

Directions: 

1. Fill up the basin with half hot water and half white vinegar 

2. Turn on your machine 

3. Add one cup of baking soda at any time during the rinse cycle 

4. Let the washer sit overnight before running another cycle with just water followed by two rinses 

5. Wipe down the rubber seal and exterior of your machine with vinegar and a soft cloth.

also visit; https://www.annexoappliance.com/samsung-appliance-repair/

2. How to Clean Top-Load Washers

A top load washer uses more water than other machines so mold and mildew can grow in its drain hose or under the lint trap. Wipe down these areas after every use, and follow these steps once a month to deep clean your top load washer: 

Direction: 

1. Fill up the basin with hot water and add one cup of baking soda 

2. Let this mixture sit for 30 minutes followed by an entire wash cycle 

3. Wipe down any dirt that’s visible on the inside of your washing machine with vinegar and a soft cloth 

4. Wipe down the rubber seal of your machine with vinegar and a soft cloth

3. How to Clean Washing Machine Seals

You’ve probably noticed some brown spots on the rubber part of your washing machine door gasket—these are coffee stains leftover from when you accidentally spilled coffee in there. To get rid of these brown stains, soak the rubber gasket in warm water mixed with bleach for 10 minutes. Wipe it clean after soaking, then dry thoroughly before using it once again. 

What you need

A mixture of bleach and water, gloves for handling harsh chemicals

Directions: 

1. Fill up a spray bottle with half bleach and half water and shake well 

2. Spritz the rubber gasket on your washing machine and wipe clean with a soft cloth 

3. Wipe down each side of your washer drum, paying attention to the part where the door latch is located 

4. Wipe down the exterior of your washing machine with a clean cloth or sponge dipped in bleach/water solution 

5. Wipe down the rubber seal on your washing machine’s lid once again to remove any remaining dust/grime. 

4. How to Clean Washing Machine Drains

The drain hose on your washing machine is another part that’s at risk of becoming clogged with mildew and mold if left uncleaned. Wipe down this area after every use, and follow these steps once a month to deep clean your drain: 

Direction:

1. Remove the rubber gasket from the washer; it should pop off easily if you bend it back and forth a few times 

2. Use a screwdriver or coat hanger to poke through any sticky gunk that might be blocking water drainage 

3. Wipe down all plastic parts of your machine with vinegar and a soft cloth 

4. Wipe the exterior of your machine with a soft cloth or sponge dipped in bleach/water solution 

5. Wipe down your rubber gasket before putting it back on; the area where the drain hose attaches to the washer should be clean and free of mold/mildew at this point.

Sometimes harsh material can damage the machines’ part so try to avoid it. Also, if you find any issue when cleaning the machine make sure to consult with the washing machine repair Alpharetta. They will help you in repairing that part. Make sure to consult early otherwise you may get bigger problems later.

Conclusion 

When it comes to the laundry room, there’s nothing more important than a clean washing machine. Not only does this mean keeping your washer free of dirt and mold, but also ensuring that all moving parts are lubricated so they can work as designed. In order to keep your appliance running like new for years to come, follow these four tips. 

Start with wiping down the exterior panels with a damp cloth or sponge dipped in vinegar water every few months. Then use a mixture of white vinegar and dish soap on top-loading models by filling both detergent cups at least halfway full before starting up cycle. Lastly make sure you have plenty of hot water available by using an electric kettle for any pre-soak methods.

RELATED ARTICLES

Leave a Reply

Your email address will not be published. Required fields are marked *